top of page

Publications

Most Recent Papers Published/Presented by Our Group

Journal Papers:

​

  1. Traylor, C., Inalpolat, M., Willis, D. J., and Persson, P. O., “Aeroacoustics-based Structural Health Monitoring of Airfoils with Surface Damage and Acoustic Domain-Coupling," AIAA Journal, https://doi.org/10.2514/1.J062814 [J25]

  2. Solimine, J., and Inalpolat, M., “Unsupervised Acoustic Detection of Fatigue-induced Damage Modes from Wind Turbine Blades," Wind Engineering Journal, accepted for publication. [J24]

  3. Sarikaya, B., and Inalpolat, M., “Response Sensitivity of Centrifugal Pendulum Vibration Absorbers to Symmetry-Breaking Absorber Imperfections," Journal of Sound and Vibration 535 (2022) 117037. [J23]

  4. Solimine J, Inalpolat M., “An unsupervised data-driven approach for wind turbine blade damage detection under passive acoustics-based excitation,” Wind Engineering, February 2022. doi:10.1177/0309524X221080470. [J22]

  5. Traylor, C., and Inalpolat, M., A generalized computational approach to predict high-frequency acoustic pressure response of cavity structures for structural health monitoring of wind turbine blades. Wind Engineering. December 2021. doi:10.1177/0309524X211060552. [J21]

  6. Deane, N., Gu, Y., Kao, P.C., Inalpolat, M., “Pressure monitoring based identification of the EOD suit–human interface load distribution,” International Journal of Intelligent Robotics and Applications, 5, pp.410–423, 2021. [J20]

  7. Barlow, G.J., Page, C., Drane, P., Stapleton, S.E., Fasel, B., Inalpolat, M., Combat helmet liner design for blunt impact absorption using multi-output Gaussian process surrogates. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2021; 235(16):2934-2951. doi:10.1177/0954406220960764. [J19]

  8. Beale, C., Niezrecki, C., and Inalpolat, M., “An adaptive wavelet packet denoising algorithm for enhanced active acoustic damage detection from wind turbine blades," Mechanical Systems and Signal Processing, ISSN: 0888-3270, Vol: 142, Page: 106754, 2020. [J18]

  9. Inalpolat, M., Niezrecki, C., “Acoustic Sensing Based Operational Wind Turbine Blade Monitoring,” Journal of Physics-Conference Series, J. Phys.: Conf. Ser. 1452 012050, 2020. [J17]

  10. Solimine J, Niezrecki C, and Inalpolat M. An experimental investigation into passive acoustic damage detection for structural health monitoring of wind turbine blades. Structural Health Monitoring. January 2020. doi:10.1177/1475921719895588. [J16]

  11. Drane, P., DeJesusVega, M., Inalpolat, M., Sherwood, J., Orbey, N., “Inductive quantification of energy absorption of high-density polyethylene foam for repeated blunt impact,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, manuscript ID: JMDA-19-0216, 2020. [J15]

  12. Traylor, C, DiPaola, M, Willis, DJ, and Inalpolat, M. “A computational investigation of airfoil aeroacoustics for structural health monitoring of wind turbine blades,” Wind Energy, 23, pp.795– 809, 2019. [J14]

  13. Beale, C., Inalpolat, M., and Niezrecki, C., "Active acoustic damage detection of structural cavities using internal acoustic excitations," Structural Health Monitoring, manuscript ID: SHM-18-0318, https://doi.org/10.1177/1475921719835761, pp.1-18, 2019. [J13]

  14. Beale, C., Niezrecki, C., Willis, D. J., and Inalpolat, M., "Passive acoustic damage detection of structural cavities using flow-induced acoustic excitations" Structural Health Monitoring, manuscript ID: SHM-18-0257, https://doi.org/10.1177/1475921719860389, pp.1-14, 2019. [J12]

  15. Willis, D. J., Niezrecki C., Kuchma, D., Hines, E., Arwade, S., Barthelmie, R. J., DiPaola, M., Drane, P. J., Hansen, C. J., Inalpolat, M., Mack, J. H., Meyers, A. T., and Rotea, M., “Wind Energy Research: State-of-the-Art and Future Research Directions”, Renewable Energy, Volume 125, pp.133-154, September 2018. [J11]

  16. Sun, Hongwei, Su, Junwei, Inalpolat, Murat, Wang, Pengtao, Charmchi, Majid, Esmaeilzadeh, Hamed, Ji, Siqi, “Effect of wetting states on frequency response of a micropillar-based quartz crystal microbalance", Sensors & Actuators: A. Physical, Volume 286, pp. 115-122, February 2019. [J10]

  17. T. Regan, C. Beale, and M. Inalpolat, “Wind Turbine Blade Damage Detection Using Supervised Machine Learning Algorithms”, ASME Journal of Vibration and Acoustics, Vol. 139, pp.1-14, Dec 2017. [J9]

  18. D. C. Fyler, M. Inalpolat, “A Dynamic Model for Double Planet Planetary Gearsets”, ASME Journal of Vibration and Acoustics, Vol. 138, April 2016. [J8]

  19. P. Poozesh, J. Baqersad, C. Niezrecki, and M. Inalpolat, “Structural health monitoring of wind turbine blades using acoustic microphones”, Structural Health Monitoring, Nov 2016. [J7]

  20. M. Inalpolat, M. Handschuh and A. Kahraman, “Influence of Indexing Errors on Dynamic Response of Spur Gear Pairs”, Mechanical Systems and Signal Processing, 2015. [J6]

  21. H. Luo, C. Hatch, J. Hanna, M. Kalb, A. Weiss, J. Winterton, M. Inalpolat, C. Dannehy, “Amplitude Modulations in Planetary Gears”, Wind Energy, 17 (4), pp. 505–517, 2014. [J5]

  22. M. Inalpolat, M. Caliskan and R. Singh, “Analysis of near field sound radiation from a resonant unbaffled plate using simplified analytical models”, Noise Control Engineering Journal, 58 (2), pp. 145-156, 2010. [J4]

  23. M. Inalpolat, A. Kahraman, “A dynamic model to predict modulation sidebands of a planetary gearset having manufacturing errors”, Journal of Sound and Vibration, 329, pp. 371-393, 2010. [J3]

  24. M. Inalpolat, A. Kahraman, “A theoretical and experimental investigation of modulation sidebands of planetary gear sets”, Journal of Sound and Vibration, 323, pp. 677-696, 2009. [J2]

  25. M. Inalpolat, A. Kahraman, “Dynamic modeling of planetary gears of automatic transmissions”, Proc. IMechE Part-K: Journal of Multi-body Dynamics, 222, pp. 229-242, 2008. [J1]

​

​

​

Conference Papers:

​

  1. Lee, H. K., Kim, M., S., Inalpolat, M., Ozdemir, E. T., “Development of In-Wheel Motor System NVH Performance Analysis Tool and Its Application to In-Wheel Motor NVH Development Study (Korean),” Korean Society for Noise & Vibration Engineering (KSNVE) Conference, October 2023, Jeollanam-do, South Korea, presented in October, 2023. [C36]

  2. Ozdemir, E. T., Inalpolat, M., Lee, H. K., Kim, M., S., “A Three-dimensional Dynamic Model for Multi-mesh Geared Systems Operating under Stick-Slip Motion Generated Excitations,” ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE2023, August 20-23, Boston, MA, USA, August, 2023. [C35]

  3. Gao, Y., Epstein, S., Inalpolat, M., Wu, Y., and Gu, Y., “Modeling of Interface Loads for EOD Suit Wearers,” 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (AIM 2023), June 27 to July 1, Seattle, WA, USA. [C34]

  4. Traylor, C. and Inalpolat, M., “Computational investigation into the effect of material properties on aeroacoustics based damage detection from wind turbine blades," NOISE-CON 2022, June 13-15, Lexington, KY (Best Paper Award). [C33]

  5. Epstein, S., Iqbal, A., Gu, Y., and Inalpolat, M., “Predicting Ankle Torque to Enhance Human Performance while utilizing ExoBoots,” MECC 2022, October 2-5, Jersey City, NJ. [C32]

  6. Traylor, C., and Inalpolat, M., “Strategic Sensor Placement for Structural Health Monitoring of Wind Turbine Blades Using Internal Cavity Acoustics,” NAWEA 2022, September 20-22, Newark, DE. [C31]

  7. Traylor, C., Inalpolat, M., “Prediction of wind turbine blade trailing edge noise under various flow conditions for a passive damage detection system,” Internoise 2021 International Conference, Washington, DC, USA, August 2021. [C30]

  8. Ozdemir, E. T.,  Sarikaya, B., Inalpolat, M., Lee, H. K., Kim, M. S, “A multibody dynamic model for predicting operational load spectra of dual clutch transmissions,” Internoise 2021 International Conference, Washington, DC, USA, August 2021. [C29]

  9. Ozdemir, E. T., Inalpolat, M., “A dynamic shell model for diagnostics of rotating machinery under periodic excitation,” Internoise 2021 International Conference, Washington, DC, USA, August 2021. [C28]

  10. Sarikaya, B., Ozdemir, E. T., Inalpolat, M., Lee, H. K., Kim, M. S, “An analytical model for predicting noise radiated by switch reluctance electric motors,” Internoise 2021 International Conference, Washington, DC, USA, August 2021. [C27]

  11. Sarikaya, B., Burnham, B., and Inalpolat, M., “A Computational Investigation into Vibration Absorption Performance of Centrifugal Pendulum Absorbers with Different Absorber Configurations,” International Modal Analysis Conference (IMAC XXXIX), February 2021. [C26]

  12. Inalpolat, M., “Saving Blades using Their Acoustic Signature”, WindTech International (11/24/2020). [C25]

  13. Inalpolat, M., Niezrecki, C., “Acoustic Sensing Based Operational Wind Turbine Blade Monitoring,” NAWEA WindTech 2019 Conference, October 14-17, 2019, UMass Amherst, MA, USA. [C24]

  14. Traylor, C., Inalpolat, M., “A Computational Investigation into the Impact of Sensor Location on the Acoustics-based Damage Detection from An Airfoil Structure,” ASME 2019 IDETC International Conference, Anaheim, CA, USA, August 2019. [C23]

  15. Sarikaya, B., Inalpolat, M., Lee, H. K., and Kim, M. S., “An Analytical Investigation of the Impact of Design Parameters on the Performance of Centrifugal Pendulum Vibration Absorbers,” ASME 2019 IDETC International Conference, Anaheim, CA, USA, August 2019. [C22]

  16. Slavkovsky, E., Inalpolat, M., and Flodin, A., “An Analytical Investigation of Rattle Characteristics of Powder Metal Gears Sarikaya,” ASME 2019 IDETC International Conference, Anaheim, CA, USA, August 2019. [C21]

  17. Beale, C., Inalpolat, M., and Niezrecki, N., “An Experimental Investigation into the Acoustic Attenuation across the Boundaries of Laboratory-scale Cavity Structures,” International Modal Analysis Conference (IMAC XXXVII), January 2019, Orlando, Florida. [C20]

  18. Beale, C., Inalpolat, M., and Niezrecki, N., “An Experimental Investigation into the Interactions between Acoustic Modes and Structural Damage on a Cavity Structure,” International Modal Analysis Conference (IMAC XXXVI), February 2018, Orlando, Florida. [C19]

  19. Solimine, J., Inalpolat, M., “Principal Component Analysis Based Feature Extraction for Acoustics Based Damage Detection from Cavity Structures,” International Modal Analysis Conference (IMAC XXXVI), February 2018, Orlando, Florida. [C18]

  20. Fickenwirth, P., Inalpolat, M., “Feature Extraction for Vibration Based Damage Detection Using Spatio-temporal Structural Patterns,” International Modal Analysis Conference (IMAC XXXVI), February 2018, Orlando, Florida. [C17]

  21. P. Drane, X. Wang, M. Inalpolat and J. Sherwood, “Outcomes of a Cross-Disciplinary Concussion Prevention and Diagnosis Workshop Series”, 12th conference of the International Sports Engineering Association, Brisbane, Queensland, Australia, 26-28 March 2018. [C16]

  22. M. Inalpolat, “Simulation of Planetary Gear Pitting Under Dynamic Conditions”, ASME IDETC International Conference, Cleveland, OH, USA, August 2017. [C15]

  23. C. Beale, M. Inalpolat, C. Niezrecki, and D. J. Willis, “An experimental investigation into the insertion loss from subscale acoustic enclosures with geometric imperfections”, 173rd Meeting of the Acoustical Society of America and the 8th Forum Acusticum, Boston, MA, USA, June 2017. [C14]

  24. Junwei Su, Murat Inalpolat, Tingjian Ge, Hamed Esmaeilzadeh, and Hongwei Sun, “Frequency Shift of Micropillar in Different Wetting State with Application to the Quartz Crystal Microbalance”, ASME FEDSM2017 International Conference, submitted, Dec 2016. [C13]

  25. T. Regan, R. Canturk, E. Slavkovsky, C. Niezrecki, and M. Inalpolat, “Wind Turbine Blade Damage Detection Using Various Machine Learning Algorithms”, ASME IDETC International Conference, Charlotte, NC, USA, August 2016. [C12]

  26. Junwei Su, Murat Inalpolat, Tingjian Ge, Hamed Esmaeilzadeh, and Hongwei Sun, “Experimental study and analysis of dropwise condensation using quartz crystal microbalance”, ASME HTFEICNMM International Conference, July 2016. [C11]

  27. D. Fyler, M. Inalpolat, S. Lee, and H. Lee, “A Design Framework to Improve the Dynamic Characteristics of Double Planet Planetary Gearsets, International Modal Analysis Conference (IMAC XXXIV), Orlando, Florida, Jan 2016. [C10]

  28. D. C. Fyler, M. Inalpolat, “A Dynamic Model for Double Planet Planetary Gearsets”, ASME IDETC International Conference PTG-2015, Boston, MA, USA, August 2015. [C9]

  29. R. Canturk, M. Inalpolat, “Development of an Acoustic Sensing Based SHM Technique for Wind Turbine Blades, International Modal Analysis Conference (IMAC XXXIV), Orlando, Florida, Feb 2015. [C8]

  30. R. Canturk, M. Inalpolat, “A Computational Acoustic Interrogation of Wind Turbine Blades with Damage,” Comsol Conference, Boston, Massachusetts, USA, 2015. [C7]

  31. K. Aizawa, P. Poozesh, C. Niezrecki, M. Inalpolat and G. Heilmann, “Wind Turbine Blade Health Monitoring Using Acoustics Array Measurements”, Proc. ​SPIE Health Monitoring of Structural and Biological Systems, 2015. [C6]

  32. M. Inalpolat, “A Computational Model to Investigate the Influence of Spacing Errors on Spur Gear Pair Dynamics, International Modal Analysis Conference (IMAC XXXIII), Orlando, Florida, Feb 2015. [C5]

  33. M. Inalpolat, M. Handschuh, A.Kahraman, “Impact of indexing errors on spur gear dynamics”, International Gearing Conference 2014, Lyon, Germany, August 2014. [C4]

  34. M. Inalpolat, M. Caliskan and R. Singh, “Sound radiated from a resonant plate: comparative evaluation of experimental and computational methods”, Noise-Con08, Dearborn, Michigan, July 2008. [C3]

  35. M. Inalpolat, A.Kahraman, “Free Vibration Analysis of Multi-Stage Planetary Gear Trains”, InterNoise07, Istanbul, Turkey, August 2007.  [C2]

  36. M. Inalpolat, M.Caliskan, “An integrated approach for determination of radiation characteristics of plates by sound and structural intensity techniques”, ICSV11 (International Congress on Sound & Vibration), St.Petersburg, Russia, July 2004. [C1]

​

​

​

Patents/Disclosures:

 

  1. Inalpolat, M., Niezrecki, N., Luo, Y., “Wind Turbine Blade and Internal Cavity Structural Health Monitoring System”, UML# 2023-011, invention disclosure filed, Jan 6, 2023.

  2. G. Camci-Unal, M. Inalpolat, “Origami-Inspired Shape Adaptive Textiles for Military Camouflage”, UML# 2020-019, invention disclosure filed, Jan 2020.

  3. A UML copyright for the machine-learning guided helmet design tool for US Army DEVCOM (June, 2020).

  4. M. Inalpolat, S. Stapleton, P. Drane, C. Page, G. Barlow, B. Fasel, “Automated Design Optimization Process for Protective Equipment”, UML 2019-042, software copyright filed, Nov 2019.

  5. C. Niezrecki, M. Inalpolat, “A wireless acoustic sensing based method for structural health monitoring of wind turbine blades”, WO2015065873A3, filed, 2015.

  6. D. Trivedi, N. Turnquist, X. Zheng and M. Inalpolat, “System and Method for Thrust Bearing Actuation to Actively Control Clearance in a Turbo Machine”, US Patent 9,593,589, 2017.

  7. D. Trivedi, N. Turnquist, X. Zheng and M. Inalpolat, “System and method for estimation and control of clearance in a turbo machine”, US Patent App. 14/132,313, 2015.

  8. D. Trivedi, N. Turnquist, X. Zheng and M. Inalpolat, “Seal Design and Active Clearance Control Strategy for Turbomachines”, US Patent App. 13/596,386, 2014.

bottom of page